• Rockwood 295.32D 2 X 2 X 48 Stainless Steel Square Corner Guard, 2″ x 2...

    • Fastener: #6 x 5/8″ OH SMS
    • Satin finish
    • Square Top Corners
  • Unistrut Post Base Single Channel, 4 Hole, Square, 3-1/2″ Channel

    • Post Base Single Channel 4 Hole Square 3-1/2″ – A Square Fence Post Base with 4 holes.
    • Secures strut assembly to floor or other surface
    • Side Orientation
    • 4 Mounting Holes
    • 6″ x 6″ Base
  • Unistrut Post Base Single Channel, 2 Hole, Standard, 3-1/2″ Channel

    • Post Base Single Channel 2 Hole Standard 3-1/2″ – Durable Zinc-Plated Fence Post Base.
    • Secures strut assembly to floor or other surface
    • 2 Mounting Holes
    • 4″ x 6″ Base
    • Galvanized Steel
  • Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4″ x 4″ x 7/8″ Pa...

    • Refrigeration and Air Conditioning, or other high vibration and noise associated with HVAC equipment or machinery.
  • Unistrut Two Bearing Trolley Assembly is Made with Hot-Rolled Carbon Steel, 1 Pi...

    • Andustrial Steel – Two Bearing Trolley Assembly TW-PS-101 – Made with Hot-Rolled Carbon Steel
    • Ball Bearings: Stainless Steel – No Lubrication Required
    • Safety Factor: 2.5
    • Applications: Not For Continuous Cycling-Works With B22 Series Channel 1-5/8″ wide. Minimum Height required: 1-5/8″
    • Finish: Zinc Galvanized Steel
  • High craft PLTB38-20 Ceiling Flange Hanger Plate for 3/8 in. Threaded Rod (Not P...

    • SECURITY: Provides Solid Structural Support for Threaded Rods in Your Plumbing Applications
    • #1 HOME ESSENTIAL: Keep These Wall Mounting Brackets At Hand At All Times And Let The Magic Begin! These Angle Brackets Will Do A Great Job Mounting and Supporting Every Corner of Your Home. Use Them To Build The Most Magnificent Industrial Shelves, Wine Bottle Tiki Torches, Curtain Rods, Flower Vases, Tables, Mailboxes And Barns. If You Are the Creative Type, You Will LOVE These
    • QUALITY: Designed With Superior Quality Malleable Iron; Rust Resistant; Corrosion Resistant; For Indoor and Outdoor Use
    • DIMENSIONS: This PEX Support 3/8 in. Measures 1-3/8 in. W x 3-5/16 in. L. It Accepts a 3/8 in. Threaded Rod and 2 #12 Screws. Max Load is 180.
    • ULTRA-STURDY MOUNTING: These Pipe Hanger Supports Were Designed for Use in Heavy Duty Applications! They wont Buckle under Pressure and Will Perform Beautifully in the All Commercial and Residential Applications
  • High craft PLTG12-20 Ceiling Flange Hanger Plate for 1/2 in. Threaded Rod (Not P...

    • SECURITY: Provides Solid Structural Support for Threaded Rods in Your Plumbing Applications
    • #1 HOME ESSENTIAL: Keep These Wall Mounting Brackets At Hand At All Times And Let The Magic Begin! These Angle Brackets Will Do A Great Job Mounting and Supporting Every Corner of Your Home. Use Them To Build The Most Magnificent Industrial Shelves, Wine Bottle Tiki Torches, Curtain Rods, Flower Vases, Tables, Mailboxes And Barns. If You Are the Creative Type, You Will LOVE These
    • QUALITY: Designed With Superior Quality Galvanized Malleable Iron; Rust Resistant; Corrosion Resistant; For Indoor and Outdoor Use
    • DIMENSIONS: This PEX Support 1/2 in. Measures 1-3/8 in. W x 3-5/16 in. L. It Accepts a 3/8 in. Threaded Rod and 2 #12 Screws. Max Load is 180.
    • ULTRA-STURDY MOUNTING: These Pipe Hanger Supports Were Designed for Use in Heavy Duty Applications! They wont Buckle under Pressure and Will Perform Beautifully in the All Commercial and Residential Applications
  • 1/2″-13 x 5 ft ASTM A307 Gr A Zinc Plated Low Carbon Steel Threaded Rod (P...

    • The most economical and most common form of Threaded Rod.
    • Typically used by the plumbing and contracting trades. Used in maintenance departments in various applications.
    • Tensile Strength 60000 psi Grade A Thread Size 13 Hardness Rockwell B100 Diameter-Thread Size 1/2″-13 Thread Requirement 1A Finish Zinc Diameter 1/2″ Specification ASTM A307 Material Steel Thread Coarse Type Threaded Rod System of Measurement Imperial (Inch) Length 5 ft. The most economical and most common form of Threaded Rod. Typically used by the plumbing and contracting trades. Used in maintenance departments in various applications.
    • Zinc plating, retards the corrosion rate in a normal atmosphere.
    202.97 CAD
  • Fastenal U Channel 1″ x 2″ x 1″ 5′ Long, Galvanized 16 G...

    • Used for Construction needs and hanging, framing, and all Custom Needs ,
    • Can be cut to desired length for custom needs
    • Durable and easy to use.
    • These U-Channels are rectangular metal channels commonly used in door framing and wire protection or harnessing. Popular materials plain steel. U-Channels can be cut to length making it very convenient for custom requirements. Cutting required if less than standard offered lengths are desired.
    257.77 CAD
  • Unistrut P2407-1-5/8″ End Cap for 12 Gauge Strut 10 Pack

    • Unistrut P2407 – 1-5/8″ End Cap for 12 Gauge Strut Electro-Galvanized
    • Material Steel Type End Cap Product Weight 0.0673 UOM Pack Of 24. For use with P1000 Channel.
  • Unistrut P1326 3-Hole 90 Plate Fitting, Electrogalvanised Fini

    • Unistrut 3 hole 90��� plate fitting. P1356 corner angle
    • Hole Diamet” (14mm). Hole Spacing (From End): 13/16″ (21mm). Hole Spacing (On-Center): 1 7/8″ (48mm). Width: 1 5/8″ (41mm)
    • Electrogalvanised (EG) Finish. used with all strut channels or as a connector bracket
    • Custom Package available upon request
    219.31 CAD
  • Unistrut P1010 1/2″-13 Electrogalvanised Channel nut with Spring for All 1...

    • Unistrut 1/2″- 13 Spring nut
    • Compatible with 1-5/8″ Channels. P1000, P1100, P2000, P3000 Series and more.
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    214.24 CAD
  • Unistrut P4010 1/2″-13 Electrogalvanised Channel nut with Spring for All P...

    • Unistrut 1/2″-13 Spring nut
    • Compatible with 1-5/8″ series. P3300, P3300T, P3301, P4000, P4000T, P4001 Series and more.
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    422.50 CAD
  • Unistrut P4008 3/8″-16 Electrogalvanised Channel nut with Spring for All P...

    • Unistrut 3/8″-16 Spring nut
    • Compatible with 1-5/8″ series. P3300, P3300T, P3301, P4000, P4000T, P4001 Series and more.
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    325.00 CAD
  • Unistrut P1008 3/8″-16 Electrogalvanised Channel nut with Spring for All 1...

    • Unistrut 3/8″- 16 Spring nut
    • Compatible with 1-5/8″ Channels. P1000, P1100, P2000, P3000 Series and more.
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    133.12 CAD
  • Unistrut P1008 3/8″-16 Electrogalvanised Channel nut with Spring for All 1...

    • Unistrut 3/8″- 16 Spring nut
    • Compatible with 1-5/8″ Channels. P1000, P1100, P2000, P3000 Series and more.
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    263.25 CAD
  • Unistrut P1356 3-Hole Flate Plate Fitting, Electrogalvanised Finish. (10)

    • Unistrut 3 Hole Flat plate fitting. P1356
    • Hole Diameter: 9/16″ (14mm). Hole Spacing (From End): 13/16″ (21mm). Hole Spacing (On-Center): 1 7/8″ (48mm). Width: 1 5/8″ (41mm)
    • Electrogalvanised (EG) Finish. Cross plate used to connect strut channels.
    • Thickness: 1/4″ (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33.
    390.00 CAD
  • Unistrut P1028 5-Hole Flate Plate Fitting- Cross Plate to Join Strut Channel- (8...

    • Unistrut 5 Hole Flat plate fitting. P1028
    • Hole Diameter: 9/16″ (14mm). Hole Spacing (From End): 13/16″ (21mm). Hole Spacing (On-Center): 1 7/8″ (48mm). Width: 1 5/8″ (41mm)
    • Electrogalvanised (EG) Finish. Cross plate used to connect strut channels.
    • Thickness: 1/4″ (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33.
    335.40 CAD
  • Unistrut P3008 3/8″-16 Electrogalvanised Channel nut Without Spring for Al...

    • Unistrut 3/8″-16 channel nut without Spring
    • Compatible with any channel. (P1000, P3000, P4400, P4526, P5000, P5500, P3300 and more..)
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    • Allowable pull out strength- 1000Lbs. Resistanve to Slip at 800 Lbs.
    251.42 CAD
  • Unistrut P1010 1/2″-13 Electrogalvanised Channel nut with Spring for All 1...

    • Unistrut 1/2″- 13 Spring nut
    • Compatible with 1-5/8″ Channels. P1000, P1100, P2000, P3000 Series and more.
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    133.12 CAD
  • Unistrut P1028 5-Hole Flate Plate Fitting- Cross Plate to Join Strut Channel- (1...

    • Unistrut 5 Hole Flat plate fitting. P1028
    • Hole Diameter: 9/16″ (14mm). Hole Spacing (From End): 13/16″ (21mm). Hole Spacing (On-Center): 1 7/8″ (48mm). Width: 1 5/8″ (41mm)
    • Electrogalvanised (EG) Finish. Cross plate used to connect strut channels.
    • Thickness: 1/4″ (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33.
  • Unistrut P3008 3/8″-16 Electrogalvanised Channel nut Without Spring for Al...

    • Unistrut 3/8″-16 channel nut without Spring
    • Compatible with any channel. (P1000, P3000, P4400, P4526, P5000, P5500, P3300 and more..)
    • Electrogalvanised (EG) Finish.
    • Custom Packs available upon request.
    • Allowable pull out strength- 1000Lbs. Resistanve to Slip at 800 Lbs.
    319.02 CAD
  • Unistrut P1356 3-Hole Flate Plate Fitting, Electrogalvanised Finish. (1)

    • Unistrut 3 Hole Flat plate fitting. P1356
    • Hole Diameter: 9/16″ (14mm). Hole Spacing (From End): 13/16″ (21mm). Hole Spacing (On-Center): 1 7/8″ (48mm). Width: 1 5/8″ (41mm)
    • Electrogalvanised (EG) Finish. Cross plate used to connect strut channels.
    • Thickness: 1/4″ (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33.
  • Unistrut Pre Galvanized Steel Slotted Channel 1-5/8″ x 13/16″ x 5...

    • Designed to carry the heaviest loads and provide the widest variety of applications,
    • The P4000 series has become the accepted standard for use in mechanical, electrical and general construction applications where supports and attachments must meet the highest strength requirements.
    • Grade 33 Style Half Slot Height: 13/16″” Width: 1-5/8″ Finish Pre-Galvanized Material Steel Type Strut Channel Length 5 ft Material Thickness 14 gauge.
    • Custom package Size and length available.
    303.81 CAD
  • Unistrut Pre Galvanized Steel Solid Channel 1-5/8″ x 13/16″ x 5̸...

    • Designed to carry the heaviest loads and provide the widest variety of applications,
    • The P4000 series has become the accepted standard for use in mechanical, electrical and general construction applications where supports and attachments must meet the highest strength requirements.
    • Grade 33 Style Half Slot Height: 13/16″” Width: 1-5/8″ Finish Pre-Galvanized Material Steel Type Strut Channel Length 5 ft Material Thickness 14 gauge.
    320.71 CAD
  • Unistrut (Pack of 5 ) Beam Clamp P2785 EG, 1-5/8″ X 3-3/8″ Electro-G...

    • Clamping Range 3/4″ Mount Type Bottom Flange Style U-Bolt Height 3-3/8″ Width 3″ Finish Galvanized Bolt Size 3/8″-16 Specification ASTM A1011 Material Steel Type Strut Channel Beam Clamp Product Weight 0.83 UOM Each.
    • Fittings are punch-press made and conform to ASTM specifications.
    • Nuts and bolts are case hardened and have unified coarse screw heads. Hardware and other supports and accessories are high quality system components that are designed to work with the Unistrut (R) framing system.
    • All hardware is designed and manufactured to complete the Unistrut metal framing system offering.
    • Unistrut the original metal framing system – the most complete line of fittings and strut accessories When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
    131.35 CAD
  • Unistrut ( Pack of 5 ) Adjustable Angle Hinge P1843 EG 2-Hole Electro Galvanized...

    • Unistrut P1843 EG 2-Hole Electrogalvanized Zinc Steel Adjustable Angle Hinge Connection
    • ittings are punch-press made and conform to ASTM specifications. Electro-Galvanized Zinc is deposited on part in an electroplating process. SC1 (mild) has a Zinc coating of 0.2 and is recommended for dry indoor use.
    312.00 CAD
  • Unistrut ( Pack of 5 ) Adjustable Angle P1499 EG 2-Hole Electro Galvanized Zinc ...

    • Unistrut Adjustable Angle P1499 EG 2-Hole Electro galvanized Zinc Steel
    • Fittings are punch-press made and conform to ASTM specifications. Electro-Galvanized Zinc is deposited on part in an electroplating process. SC1 (mild) has a Zinc coating of 0.2 and is recommended for dry indoor use. “A” dim is 6-7/8″, “B” dim is 4-1/2″.
    199.80 CAD
  • (10 – Pack) Unistrut Tee Plate 1-5/8″ P1031 EG, 4 Hole, Electro-Galv...

    • Unistrut Tee Plate 1-5/8″ P1031 EG , 4 Hole, Electro-Galvanized
    • Fittings are punch-press made and conform to ASTM specifications. Electro-Galvanized Zinc is deposited on part in an electroplating process. SC1 (mild) has a Zinc coating of 0.2 and is recommended for dry indoor use.
    119.12 CAD
  • Fastenal ( Pack of 10 ) Steel/Wood Hanger Bolt Carbon Steel Plain Finish 3/8R...

    • Carbon Steel Plain Finish Hanger Bolt 3/8″-16 x 6
    • Hanger Bolts have threaded areas at both ends, a lag screw thread at one end and machine screw thread on the other.
    • They are designed for insertion into a pre-drilled hole and are ideal for overhead application, usually in a wall or ceiling. Plain finish, or bare metal, may or may not have a coating of light oil to resist corrosion.
    • Plain finish, or bare metal, may or may not have a coating of light oil to resist corrosion.

Main Menu

Call