Hidden shelf hardware, engineered to support shelves that are 2″ – 2 1/4″ thick, and from 7″ to 14″ deep. The original patented bracket
Simple to install on masonry, sheetrock, plaster, and paneled walls
This hardware will support a maximum distributed load up to 135 lbs., when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the shelf to your hardware. You can also glue the shelf onto the hardware with silicone. Both are equally effective, glue is the easiest method
Hidden shelf hardware, engineered to support shelves that are 2″ – 2 1/4″ thick, and from 7″ to 14″ deep. The original patented bracket
Simple to install on masonry, sheetrock, plaster, and paneled walls
This hardware will support a maximum distributed load up to 135 lbs., when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the shelf to your hardware. You can also glue the shelf onto the hardware with silicone. Both are equally effective, glue is the easiest method
Hidden mantel hardware, engineered to support mantels that are 2 1/4″ – 3″ thick, and from 7″ to 14″ deep. The original patented bracket
Made to install on masonry, sheetrock, plaster, and paneled surfaces
Supports a maximum distributed load up to 200 lbs., when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the mantel to your hardware. You can also glue the mantel onto the hardware with silicone. Both are equally effective, glue is the easiest method
Hidden shelf hardware, engineered to support shelves that are 2″ – 2 1/4″ thick, and from 7″ to 14″ deep
Easy to mount and level to any wall surface
Supports a maximum distributed load up to 225 pounds, when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the shelf to your hardware. You can also glue the shelf onto the hardware with silicone. Both are equally effective, glue is the easiest method
Hidden mantel hardware, engineered to support mantels that are 2 1/4″ – 3″ thick, and from 7″ to 14″ deep. The original patented bracket
Made to install on masonry, sheetrock, plaster, and paneled walls
Supports a maximum distributed load up to 150 lbs., when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the mantel to your hardware. You can also glue the mantel onto the hardware with silicone. Both are equally effective, glue is the easiest method.
Hidden mantel hardware, engineered to support mantels that are 3 1/2″ thick, and from 7″ to 14″ deep. The original patented bracket
Made to install on masonry, sheetrock, plaster, and paneled walls
Supports a maximum distributed load up to 300 lbs., when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are OD
A set screw hole can be drilled in the outside rods to screw the mantel to your hardware. You can also glue the mantel onto the hardware with silicone. Both are equally effective, glue is the easiest method
Hidden shelf hardware, engineered to support shelves that are 2″ – 2 1/2″ thick, and from 7″ to 14″ deep. The original patented bracket
Easy to mount and level to any wall surface
Supports a maximum distributed load of up to 135 pounds, when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the shelf to your hardware. You can also glue the shelf onto the hardware with silicone. Both are equally effective, glue is the easiest method
Hidden shelf hardware, engineered to support shelves that are 2″ – 2 1/4″ thick, and from 7″ to 14″ deep. The original patented bracket
Simple to install on masonry, sheetrock, plaster, and paneled walls
This hardware will support a maximum distributed load of up to 135 lbs. when installed correctly
Screw holes are set 1″ OC from each end and continue 4″ OC down the length of the hardware. Countersunk screw holes are 3/16″ OD
A set screw hole can be drilled in the outside rods to screw the shelf to your hardware. You can also glue the shelf onto the hardware with silicone. Both are equally effective, glue is the easiest method
