-
Honeywell -TK30PV125SFM- 1 1/4″ SuperVent Kit.
- Includes: Honeywell TK300-30 Heating Expansion Tank, Honeywell PV125S SuperVent Air Eliminator, Honeywell SCV-050 Check Valve, Honeywell FM911 FM Boiler Fill Valve
- Deep-drawn steel tank, Controls system pressure
- Air-tight cushion-factory pre-charged to 12 PSIG and 100% tested.
$763.55 -
Honeywell -TK30PV100SFM- Sweat SuperVent Kit.
- Includes: Honeywell TK300-30 Heating Expansion Tank, Honeywell PV100S SuperVent Air Eliminator, Honeywell SCV-050 Service Check Valve, Honeywell FM911 FM Boiler Fill Valve.
- Deep-drawn steel tank, Controls system pressure
- Air-tight cushion-factory pre-charged to 12 PSIG and 100% tested.
$737.84 -
Watts Non-Potable Water Expansion Tank- 4.5 Gallon- Watts
- This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve.
- This carbon steel tank is pre-charged at 12 PSI, tank volume is 4.5 gallons and features a durable expansion membrane that prevents contact of the water with the air in the tank.
- This rugged butyl diaphragm minimizes loss of the air change and ensures long and trouble-free life for the system. This tank is made of carbon steel with epoxy finish, mounts to supply piping, 1/2 inch MNPT system connection and a 0.302-32 inch charging valve connection (standard tire valve) to facilitate on-site charging of the tank to meet system requirements
- The maximum working pressure is 75 PSI (5.3 BAR).
$144.30 -
Watts Non-Potable Water Expansion Tank, 2.1 Gallons- ETX-15
- This non-potable water expansion tank is designed for use in commercial and residential closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief setting of the relief valve.
- This carbon steel tank is pre-charged at 12 PSI, tank volume is 2.1 gallons and features a durable expansion membrane that prevents contact of the water with the air in the tank.
- This rugged butyl diaphragm minimizes loss of the air change and ensures long and trouble-free life for the system. This tank is made of carbon steel with epoxy finish, mounts to supply piping, 1/2 inch MNPT system connection and a 0.302-32 inch charging valve connection (standard tire valve) to facilitate on-site charging of the tank to meet system requirements
- The maximum working pressure is 75 PSI (5.3 BAR).
$72.98 -
Watts ET-30 4.7-Gallon Non-Potable Expansion Tank for Closed-Loop Systems
- For use in closed-loop, non-potable water heating systems
- 4. 7-gallon capacity
- Durable steel tank
- 60 psi maximum working pressure
$81.73
Shop By Categories
- Heating
GAS PRODUCTS
SPECIALTIES & Electric Heat
RADIATORS – In floor Heating & TRIM
- HVAC
Miscellaneous Accessories and Parts
Air Quality
- Custom Metal Fabricationhot
Table Legs
Metal Gates
Laser cut panels
Wood logs Rakes
Pipe Décor
Stainless steel
Wall Décor
- Pools & Spa
- Fire Places
- Generators
Generators
- Control & Thermostats
Thermostats
Tekmar Controls
Temp Controllers