No products in the cart.
Roll over image to zoom in
Navien NHB-80 High Efficiency Condensing Heating Boiler 80MBTU
NHB-80 premium features and benefits
- 2″ venting up to 65′; 3” up to 150’ (including schedule 40 PVC).
- NHB integrated control provides industry-leading options and features including adjustable heat capacity, temp boost for outdoor reset control, adjustable anti-cycle timer, and freeze protection.
- The condensing technology of the dual stainless steel heat exchangers saves energy and reduces greenhouse gasses.
- The sophisticated gas flow control system provides a high turndown ratio which reduces energy waste and excessive boiler cycling.
- Super condensing efficiency
- Dual stainless steel heat exchangers
- SCH40, 2″ PVC venting up to 60′
- ½” Gas pipe up to 40′
- TDR up to 10:1
- Integrated controls
- PLEASE NOTE: In order to purchase this product, we would need assurance this product will be installed by a Licensed Technician for safety purposes. Details would be required before shipping to make sure the Technician/Company is registered to install this Product. Thanks for your cooperation.
Contact Us for Price at 289-999-2334 or info@taimco.ca
Specifications
| Item | NHB-80 | |
|---|---|---|
| Dimensions | 17.0″ W x 24.0″ H x 12.0″ D (43.2cm W x 61.0cm H x 30.5cm D) | |
| Boiler weight | 73 lbs (33.1 kg) | |
| Installation type | Indoor wall-hung | |
| Venting type | Forced draft direct vent | |
| Ignition | Electronic ignition | |
| Natural gas supply pressure (from source) | 3.5 ” WC to 10.5 ” WC | |
| Propane gas supply pressure (from source) | 8 ” WC to 13 ” WC | |
| Natural gas manifold pressure | -0.08 ” WC | |
| Propage gas manifold pressure | -0.07 ” WC | |
| Connection sizes | Gas inlet | 3/4″ NPT (hembra) |
| Power supply | Main supply | 120V AC, 60Hz |
| Maximum power consumption | Less than 10A | |
| Materials | Casing | Cold rolled carbon steel |
| Heat exchangers | Primary and secondary heat exchangers: stainless steel | |
| Venting | Exhaust | 2″ or 3″ PVC, CPVC, approved polypropylene (see installation manual for more details) 2″ or 3″ special gas vent type BH (Class III, A/B/C) |
| Intake | 2″ or 3″ PVC, CPVC, polypropylene 2″ or 3″ special gas vent type BH (Class III, A/B/C) | |
| Vent clearances | 0″ to combustibles | |
| Safety Devices | Flame rod, APS, gas valve operation detector, ignition operation detector, water temperature high limit switch, exhaust temperature high limit sensor | |
Reviews
There are no reviews yet.